If You Replace The Head/Carriage Unit - Brother MFC Series Service Manual

2

IF YOU REPLACE THE HEAD/CARRIAGE UNIT

<Operations>
2.1 Update the Head Property Data (Maintenance mode 68)
2.2 Supply Head Ink (Maintenance mode 76)
2.3 Check Head Nozzles (Maintenance mode 09)
2.4 Adjust the Head/carriage Unit Inclination
2.5 Adjustment of Software Correction for Inclination/Corrugation/Ruled Lines
(Maintenance mode 65)
2.6 Update the Paper Feeding Correction Values (Maintenance mode 58)
2.7 Margin Adjustment in Borderless Printing (Maintenance mode 66)
2.8 Write Head Calibration Data (Maintenance mode 02)
2.9 Check Printing
2.10 Obtain machine information (instruction to the end user)
<Requirements>
(1) USB cable: 1 piece
(2) Create a temporary folder in the PC's C drive (Windows
(3) Service setting tool (brusbsn.zip)
Make a copy of the Service setting tool in the temporary folder in the C drive.
Decompress the file and execute "brusbsn.exe" by double-clicking on it.
(4) Download utility (FILEDG32.EXE)
Make a copy of the download utility in the temporary folder in the C drive.
(5) Maintenance driver (MaintenanceDriver.zip)
Make a copy of the maintenance driver in the folder created in the C drive. Extract the
copied file and install it. Refer to
DRIVER"
(6) Data files of print patterns
for details on the installation.
"APPENDIX 3. INSTALLING THE MAINTENANCE
4-11
®
XP or later).
Confidential