Table of Contents
Advertisement
Manually Configuring your Router
To configure the Router with the settings that your ISP gave you, click
"Connection Type" (1) on the left side of the screen. Select the connection
type you use. If your ISP gave you DNS settings, clicking "DNS" (2) allows
you to enter DNS address entries for ISPs that require specific settings.
When you have finished making settings, the "Internet Status"
indicator will read "Connected" if your Router is set up properly.
Connection Type
From the "Connection Type" page, you can select one of these five
connection types based on the instruction provided by your ISP:
PPPoE
PPPoA
Dynamic IP (1483 Bridged)
Static IP (IPoA)
Modem Only (Disable Internet Sharing)
Note: See Appendix C in this User Manual for some common DSL
Internet setting parameters. If you are not sure, please contact your ISP.
22
22
Hide quick links:
Advertisement
Table of Contents
