Remote control holder installation
Accessories
Wireless remote
Batteries for
control (1)
remote control (2)
Installing the remote control holder
1
Mark the location on the wall where the two anchor holes will
be drilled.
2
Drill the two holes.
3
Install the remote control holder fixing screws on each hole on
the wall.
Note
When installing the remote control holder, select the
follow locations.
The remote control signal is not interfered with by
walls, curtains etc.
Out of the direct sunlight.
1m(3ft 3in) or more away from the TV or stereo
system.
M4x12 tapped
Remote control
screw (2)
holder (1)
User's
Installation
manual(1)
manual (1)
3
E-