Hoshizaki IM-21 Service Manual page 57

3) Soak a clean cloth with the neutral cleaner, and wipe both sides of the Slope and the Door
inner surface. Wipe off the cleaner with a clean damp cloth.
4) Either mix 3 litres of water with 11 ml of 5.25% sodium hypochlorite solution in a suitable
container or the recommended Hoshizaki sanitiser as directed.
5) Soak a clean sponge or cloth with the solution, and wipe the Bin liner, Bin Door and Slope.
6) Rinse thoroughly with fresh water and a clean cloth to wipe off the solution. Close the Bin
Door.
Note: Some solutions may cause damage to the Bin liner surfaces or corrosion on the
metal parts. Always rinse the sanitiser unless directed otherwise by Hoshizaki
guidelines.
[4] Air Filter (Air-Cooled Model Only)
A plastic mesh Air Filter is fitted to remove dirt or dust from the air, preventing the Condenser
from getting clogged. As the Filter becomes dirty, air circulation through the Condenser will
be reduced, affecting the icemaker's performance.
Remove and clean the Air Filter at least twice per month:
1) Unscrew [except IM-25/45/65LE/100CLE] and remove the Front Panel (Lower).
Note:Do not put your hand inside the machine compartment.
2) Remove the Air Filter.
3) Clean the Air Filter by using a vacuum cleaner. When severely clogged, use warm water
and a neutral cleaner to wash the Air Filter.
4) Rinse and dry the Air Filter thoroughly, and place it back in position.
53