Hoshizaki IM-21 Service Manual page 45

[Air-Cooled Model Except IM-100CLE]
Inlet Hose
Outlet Hose
1) Attach the angled end of white flexible inlet hose (accessory) onto the G3/4 fitting on the
rear of the icemaker as indicated (Fig. 4), ensuring rubber sealing washer is correctly
positioned. Hand tighten sufficiently to provide leak free joint.
2) Attach the other end of inlet hose to the water tap (Fig. 5), noting washer is correctly
positioned before hand tightening as above. It is a wise precaution to have a stop valve
within easy reach.
3) Hand tighten grey flexible outlet hose (accessory) onto the R3/4 fitting on the rear of the
icemaker as indicated (Fig. 4), ensuring rubber sealing washer is correctly positioned to
obtain a leak free joint. The pipe can be cut to length as necessary to suit position of main
drain.
Note:Jointing compounds should be approved and suitable for potable water use.
[IM-100CLE]
1) Attach the angled end of white flexible inlet hose (accessory) onto the G3/4 fitting on the
rear of the icemaker as indicated (Fig. 6), ensuring rubber sealing washer is correctly
positioned. Hand tighten sufficiently to provide leak free joint.
Potable Water
Inlet G3/4
Drain Outlet R3/4
Fig. 4
41
Water Supply Tap
Inlet Hose
Fig. 5