Led Signals & Symbols; Opening The Sensor; Closing The Sensor - BEA LZR-WIDESCAN User Manual

LED SIGNALS & SYMBOLS
LED is on
LED flashes
x times
x
Remote control
Troubleshooting
Factory value (User's Guide)
Factory value (LCD)
Main functions:

OPENING THE SENSOR

1
Before opening the sensor, make
sure the cover is not locked (red
cover lock).

CLOSING THE SENSOR

1
Lock the sensor position by firmly
fastening the angle lock screw.
Page 4 of 15 Page 4 of 15 Page 4 of 15 Page 4 of 15
LED is off
LED flashes
red-green
+
Additional opening functions:
Motion
Presence
Safety
2
Pull the two legs on top in order
to open the cover.
2
Reclip the sensor cover
horizontally and close it as
indicated.
LED flashes
Motion detection
Pull cord detection
Additional feature
LED flashes
quickly
Presence detection
Safety detection
Important!
Good to know
Motion +
Pullcord
Speed
Height
3
Remove the cover completely
before installing the sensor.
3
Lock the cover by turning the lock
screw clockwise.
75.5916.02 LZR-WIDESCAN 20180112 75.5916.02 LZR-WIDESCAN 20180112 75.5916.02 LZR-WIDESCAN 20180112 75.5916.02 LZR-WIDESCAN 20180112
LED flashes
slowly