Table of Contents
Advertisement
Standard 1.1
Configuration
You can configure the Avaya Remote Gateway 911x series unit through the
telephone set. The procedure is the same for either the Remote Gateway 9110
circuit card or 9115 unit. Before you begin, your System Administrator must
supply you with a completed Remote Gateway 911x series telephone menu —
Configuration Values form. Use the information provided on this form to
configure the Remote Gateway 911x series unit.
Note: The procedure to configure the Remote Gateway 911x series unit
establishes a connection between the unit and the RLC. The System Administrator
can then configure the other parameters through the network connection.
If your System Administrator has already configured your unit, you do not need to
complete the configuration procedure.
Telephone menu keys
When working with the Remote Gateway 9100 Series telephone menu, use the
following table as a guide for the proper keys to use:
Key name
DIGIT
ALPHA
YES
NO
RELEASE
ENTER
Key label
1, 2, 3, 4, 5, 6, 7, 8, 9, 0
2, 3, 4, 5, 6, 7, 8, 9
1
2
Rls, R, Goodbye
(depending on your
telephone set)
Hold
Avaya Remote Gateway 911x Series Quick Start Guide
911x telephone menu key function
user name/password entry, numeric entry
user name/password entry
request menu, enable feature
skip menu, disable feature
enter configuration mode, return to
previous menu, exit system
accept selection, move to next menu
prompt
9
Advertisement
Table of Contents
