Configuring The Avaya Remote Gateway 911X Series Unit - Avaya Remote Gateway 911 Series Quick Start Manual

Remote gateway
Table of Contents

Advertisement

Configuration
10
Key name
ASTERISK
POUND
Note: If, at any time while working with the telephone set menu, you make a
mistake, you can return to the previous level in the menu system by pressing the
Release (Rls, R, or Goodbye depending on your telephone set) key once.

Configuring the Avaya Remote Gateway 911x series unit

After installing the Avaya Remote Gateway 911x series unit and powering up:
1
2
3
4
Contact your System Administrator if you experience any problems configuring
the Remote Gateway 911x series unit.
N0027496
Key label
*
#
Press the Release key four times within three seconds to access the telephone
menu.
Result: The telephone display prompts you for a user name:
Enter User Name
Press the Rls key to exit.
Enter 48378 (GUEST) on the telephone keypad and then press Hold.
Result: The telephone display prompts you for a password:
Enter Password
Press the Rls key to exit.
Enter 48378123 (GUEST123), the default password, or the current password
if you have customized the password and then press Hold.
Result: The telephone display prompts you to display the Remote Gateway
911x series unit's IP parameters:
Display Local IP?
[1-Yes 2-No]
Use the information provided on the Remote Gateway 911x series telephone
menu — Configuration Values form to respond to each telephone display
prompt and make the appropriate menu selection. Refer to
keys" on page 9
for further assistance.
911x telephone menu key function
period (.), delimiter for IP addresses
backspace with delete
"Telephone menu

Advertisement

Table of Contents
loading

This manual is also suitable for:

Remote gateway 9110Remote gateway 9115

Table of Contents