Time Setting - La Crosse Technology WS-9014 Instruction Manual

2. Either a ": 12h" or ": 24h" will appear on the LCD. If ": 12h" is displayed then the current time display
is set to 12-hour time. If ": 24h" is displayed then the current time is set to 24-hour time.
3.
To alternate between the two times display mode, simply press the "RESET/+/MIN/MAX" key.
4. When the desired time display is selected, press the "SET/CHANNEL" key once more to enter the
Time setting mode.
Note:
When the time display is set as 12-hour mode, the temperature unit will be set to ° ° ° ° F; when the time
mode is in 24-hour format, the temperature unit will be set to ° ° ° ° C.

TIME SETTING:

Following from the 12 or 24 hour setting mode.
1. The Hour digit in the time section starts flashing
2. Using the "RESET/+/MIN/MAX" key, enter the hours of the current time and then followed by
pressing the "SET/CHANNEL" key to move into the minutes mode
3. Again, using the "RESET/+/MIN/MAX" key, enter the minutes of the current time (by holding the key
down, the digits are incremented in steps of five) and then finally followed by pressing the
"SET/CHANNEL" key to exit the setting mode. Your Temperature Station is now fully operational.
USING THE TEMPERATURE STATION:
INDOOR TEMPERATURE:
The indoor temperature is displayed on the second line of the LCD under the time. The Temperature
Station's built in sensor automatically measures the temperature once the batteries are inserted.
24