La Crosse Technology WS-9014 Instruction Manual page 9

MINIMUM AND MAXIMUM INDOOR TEMPERATURE RECORDINGS:
By pressing the "RESET/+/MIN/MAX" key the current indoor temperature will alternate between the
minimum, maximum and current temperature recordings (also changes for outdoor temperature). Once a
new indoor temperature high or low is reached, it will automatically set into the Temperature Station's
memory.
OUTDOOR TEMPERATURE READING:
The outdoor temperature reading is on the bottom line of the LCD under the indoor temperature. The
Temperature Station receives the outdoor temperature via 868 MHz frequency when the batteries are
inserted into the transmitter within the 2 minutes of the setting up time (See Setting up above).
Note: Should the outdoor temperature not be received within 2 minutes after inserting the batteries into
a transmitter, then see "Checking 868 MHz reception" below.
MINIMUM AND MAXIMUM OUTDOOR TEMPERATURE READING:
By pressing the "RESET/+/MIN/MAX" key the current indoor and outdoor temperature will alternate between
the minimum, maximum and current temperature recordings. Once a new outdoor temperature high or is low
reached, it will automatically be set into the Temperature Station's memory.
RESETTING THE MINIMUM AND MAXIMUM TEMPERATURE RECORDING:
By pressing and holding down the "RESET/+/MIN/MAX" key for about 3 seconds, both the indoor and
outdoor minimum and maximum temperature recordings will be reset to the current indoor and outdoor
25