La Crosse Technology WS-9014 Instruction Manual page 11

6. Transmission can be affected by exposure to extreme temperature conditions. For example, if the
weather has been extremely cold (under -25ºC) for an extended period of time then the transmission
signal may be weakened. (Please bears this in mind when positioning the transmitter).
Note: Should after checking the above list and the outdoor temperature is still not received, then reset the
units (see Resetting the Temperature Station below).
RESETTING THE TEMPERATURE STATION:
1. Remove the batteries from the Temperature Station and the transmitter(s)
2. Wait at least 30 seconds and repeat the procedures specified in Setting up above.
POSITIONING
TEMPERATURE STATION:
The Temperature Station comes complete with a detachable stand that gives the option
of table standing or wall mounting. To wall mount:
1. Fix a screw into the desired wall, leaving the head extended out the by about
5mm.
2. Using the Temperature Station's hanging hole, carefully hang it onto the screw.
Note: Always ensures that the unit locks onto the screw head before releasing.
27