Operation - KDF Zircom Instruction Manual

Operation Panel
Zircom features color LCD panel display.
The display shows information for content of the program, firing process, etc.
Firing operations and program input are operated by 11 keys.
Operation Panel
Function Key (F1-F4) ：Move to each mode, input programs and etc.
Key
START STOP Key
Key
Operation Modes
The unit has 7 modes for various functions.
・Standby Mode
・Program Mode
・Firing Mode
・Copy Mode
・Default Mode
・Maintenance Mode ：Checks the unit usage and its condition. →P15
・SD Card Mode

Operation

Display Panel
：Move cursor for set contents.
：Stop or Start firing operation.
：Move the table up/down.
：Standby mode before firing. After powering on, the unit will enter this mode.
→P9
：Inputs a program for each course number. →P10
：Displays temperature and firing process during firing process. →P12
：Copies a program to a different course. →P14
：Sets each operation default value and operation process. →P14
：Reads data of firing program from a SD Card. →P16
Operation Panel
-8-