Periodic Maintenance - KDF Zircom Instruction Manual

SD Card Mode
SD Card Mode allows you to save firing program data or maintenance information in a SD card so you
can edit or save on your PC.
Enter SD Card Mode：Go to Maintenance Mode and press [SD Card Mode] key to display the
Using SD Card
Export Firing Program：
Press (F2) key to export the firing program content to the SD card.
File name will be saved as "ZRM_PRG.csv". You can edit the file using software such as
EXCEL on the PC.
Export Maintenance Information：
Press (F3) to key to the maintenance information to the SD card.
File name will be saved as "ZRM_MNT.csv". In a case of troubleshooting, please send
this date to our technical support team VIA e-mail.
Importing Firing Program from SD card to Zircom：
Press (F4) key to import data from the SD Card.
In order to import a Firing Program data from SD card to the unit, you must create a
program file named "ZRM_PRG.csv" on your PC and save it on your SD Card.
Before cleaning the unit, turn off the unit and unplug the power cord.
If exterior of the unit is dirty, please use soft cloth with a mild detergent to wipe.
Cleaning the firing table
In a state in which the furnace, firing table is cold, please remove dust takes a firing platform.
following screen.

Periodic Maintenance

Please perform timely care of the following
-16-