How To Use - KDF Zircom Instruction Manual

Power On
Standby Mode
After powering on, the unit displays the Standby Mode which allows users to access to other modes.
Please see the following instruction for the standby mode below.
Display
Course
Course Name
Firing Temperature
Firing Time
Current Temperature ：Current muffle temperature.
Function Key
F1 (Program)
F2 (Copy)
F3 (Default Set)
F4 (Maintenance)
Up & Down Key
Left & Right Key
START STOP Key
(Up) Key
(Down) Key
Caution) When muffle temperature is high, for safety purpose, table moving down is limited as below.
・When muffle temperature is 900℃ and over, the unit keeps the table at the highest position (0).
・When muffle temperature is 550℃～900℃, the unit can move down the table to position (3).
・When muffle temperature is under 550℃, the unit can move down the table until lowest position (5).

How to use

：Current course number.
：Course name for current course number.
：Maximum temperature in the program.
：Total programmed firing time.
：Go to program mode. →P10
：Go to copy mode. →P14
：Go to default mode. →P14
：Go to maintenance mode. →P15
：Change course. Fast forward by holding the key longer.
：Invalid
：Start firing and go to firing mode. →P12
：Key used to move the table up.
：Key used to move the table down.
-9-