Preparation Before Operation - Daikin MC30VVM-A Operation Manual

PREPARATION BEFORE OPERATION

Please check before use
This product is for 220V~240V, 50Hz or 60Hz only.
Make sure to connect the power plug to a grounded electric outlet
(220V~240V, 50Hz or 60Hz) dedicated to the product.
How to install filter
- Always remove filter wrapping before installation.
- The unit is for residential use and thus for indoor only.
- Remove power plug from the socket when not in use.
Tips
- Check front part of the filter when installing unit.
1. Open the front cover by pulling
the lower part of it.
2. Take out the filter by pressing down on the top clip of the pre-filter, and remove its packing sheet.
3. Install filters according to the following
order. Dust collection filter (electrostatic
HEPA filter)  Deodorising filter  Pre filter
(Check the insert direction of filters and
make the hooks fixed into the unit.).
4. Fit the front cover back to the product.
▶
▶
▶
9
10