Table of Contents
Advertisement
The page includes the following specific settings in PPPoE type:
The page includes the following specific settings in PPPoE type
Object
• MTU
• Login
• Password
• Service Name (if required)
• Connect on Demand
• Keep Alive
Figure 4-16 WAN Settings – PPPOE
Description
Description
The
The maximum transmission unit (MTU) specifies the largest packet size
permitted for an
permitted for an internet transmission. The factory default MTU size
internet transmission. The factory default MTU size for
PPPoE
PPPoE is 1492. The MTU size can be set between 576 and
Enter the username
Enter the username provided by ISP.
Enter the password
Enter the password provided by ISP.
Enter the service name of an ISP
Enter the service name of an ISP (optional).
Select
Select it to specify the maximum idle time. Internet connection
specify the maximum idle time. Internet connection will
disconnect when it reach
disconnect when it reaches the maximum idle time, but it
automatically connect when user tries to access the network.
automatically connect when user tries to access the network.
automatically connect when user tries to access the network.
Select whether to keep the Internet connection always on, or enter a
Select whether to keep the Internet connection always on, or enter a
Select whether to keep the Internet connection always on, or enter a
redial period once the internet loses connection.
redial period once the internet loses connection.
-37-
User Manual of
Manual of WBS-502AC
specifies the largest packet size
between 576 and 1492.
time, but it will
格式化: 間距 套用前:
用前: 0.5 行
Advertisement
Table of Contents
