F Igure 5-16 M Ultiple -Ssid S - Planet WNAP-W2201A User Manual

Once you have applied and saved those settings, you can then go to the "WLAN  Security" page on the
AP to set up security settings for each of the SSIDs.
Universal Repeater

This mode allows the AP with its own BSS to relay data to a root AP to which it is associated with WDS
disabled. The wireless repeater relays signal between its stations and the root AP for greater wireless
range.
 Example of how to configure Universal Repeater Mode. Please take the following steps:
To configure each wireless parameter, please go to the "WLAN  Basic Settings" page.
Step 1. Configure wireless mode to "AP" and then check "Enable Universal Repeater Mode (Acting as AP
and client simultaneously)". Click "Apply Changes" to take effect.
Figure 5-16 Multiple-SSIDs
-31-
User Manual of WNAP-W2201A