Section 2: Operation - Stoelting U421 series Operator's Manual

Section 2: Operation

The machine
disassembled,
every 3 days or per local health code
requirements (whichever is sooner).
A. Empty the Freezing Cylinders
A.1
Turn off freezing cylinders.
A.2
In the cab, lift the drawer latches
and pull out the drawers.
Disconnect the bag adapters
from the bags and place caps
on the bags
Wire trays are located at the upper left and
right corners of the cab to store bag caps.
8
NOTE
must be emptied,
cleaned and sanitized
NOTE
U421-I2A & U431-I2A OPERATOR'S MANUAL
A.3
Set up cab and hoses for rinse procedure.
1. Remove the bags from the cab
and store them in a cooler.
2. Remove the three plastic bins
from the cab.
3. Remove the drawers. To
remove a drawer, pull it
out. Tilt the drawer up to
disengage the front rollers.
Pull it further out then up to
disengage the rear rollers.
A.4
Fill a bucket with 2 gallons of cool
tap water and place the coiled
hoses with bag adapters into
the bucket.
NOTE
Optional: Fill the bucket with Stera Sheen
solution to make cleaning parts easier after
disassembly.
A.5
Press the Clean buttons.
Make sure the display
shows that the mix pumps
are on
513713 REV.0