Section 3: Maintenance
C. Fine Consistency Adjustment
Product consistency can be adjusted on the Fine
Consistency Adjustment Screen.
C.1
From the Current
Status screen, press
the left arrow button to
access the password
screen.
Press the right arrow
then the SEL button.
C.2
P r e s s
t h e
S E T
b u t t o n
o n
t h e
Fine Consistency
Adjustment screen.
And use the arrows
to change the value.
Increase the value for higher consistency (thicker).
Change the +/- symbol to "-" and adjust the value for
lower consistency (thinner) product.
Make adjustments in increments of 5 for best results.
Allow 3-4 draws or 30 minutes for the changes to
take eff ect.
28
U421-I2A & U431-I2A OPERATOR'S MANUAL
C.3
Press the SET button to save the changes.
Press the SEL button to toggle between freezing
cylinders.
C.4
Press the left arrow button when done to return to the
Current Status screen.
513713 REV.0