Assembling Machine - Stoelting U421 series Operator's Manual

Section 2: Operation
E. Assembling Machine
Total Blend lubricant or equivalent must be
used when lubrication of machine parts is
specifi ed.
The USDA and FDA require that lubricants
used on food processing equipment must
be certifi ed for this use. Use lubricants
only in accordance with the manufacturer's
instructions.
Stoelting recommends allowing the parts
to air dry before assembling.
E.1
Install the rear seal o-rings onto the augers. Lubricate
the outside of the o-rings with a generous amount of
sanitary lubricant.
12
NOTE
NOTE
U421-I2A & U431-I2A OPERATOR'S MANUAL
E.2
Install the stainless steel adapter into the rear seal
WITHOUT LUBRICANT. Then lubricate the inside of
the adapter and install it onto the auger.
DO NOT lubricate the outside of the rear seal.
E.3
Lubricate the hex end of the auger with Total Blend
lubricant.
513713 REV.0