Restoring Power - Chevrolet Tahoe 2008 Owner's Manual

6. Pull out the wiring harness being careful to avoid
scraping the insulation on the edge of the hole.
7. Cut the wire to length. Install terminals to wire ends
and insert into the connector. The dark green wire
goes to cavity A and the black wire in cavity B.
Push in the secondary lock to retain the wires.
8. Attach the harness assembly from the package to
the accessory. Cover with the supplied conduit for
added protection. Connect the orange wire to the
accessory hot terminal and the black wire to
the ground.
9. Complete the connection from the roof harness to
the extension harness. Cover the mated connector
with the supplied foam. Push the foam covered
connection and excess wire through the roof
panel hole.
10. Reinstall the overhead console access panel/lamp
lenses.
14-14

Restoring Power

This switch includes wiring provisions for a
dealer/retailer or a qualified service center to install
an auxiliary roof lamp. When the wiring is connected
to an auxiliary roof mounted lamp, pressing the
bottom of the switch will activate the lamp and
illuminate an indicator light at the bottom of the switch.
The auxiliary lamp switch
is located on the overhead
console.