Canon imagePRESS C850 Series Troubleshooting Manual page 13

6) Reattach the springs attached to the both side of the removed inner paper delivery assembly to the new type inner paper
delivery assembly.
[Reference]
- Apply grease (SE1107) around the spring mount hole.
- The front/rear mounting positions and orientations of the springs are specified respectively. Attach the springs as their looped
ends [a] come outside.
The photo [A] shows the spring attached to the rear side of the inner paper delivery assembly and [B], the spring attached to the
front side of the inner paper delivery assembly.
7) Insert the new type inner paper delivery assembly from its rear side and install to the fixing base assembly. At this moment,
the spring on the rear side is not yet put around the boss.
8) Putting the looped portion of the spring on the front side in the boss, secure the front side of the inner paper delivery assembly
with the 1 screw [1] removed in the step 4).
9) Secure the rear side of the inner paper delivery assembly with the 1 e-ring (XD9-0135-000).
11