Mobile Network Setup; Bandwidth Cap Setting - Cisco RV260 series Administration Manual

WAN
Step 6
Click Apply.

Mobile Network Setup

To configure the Mobile Network Setup, follow these steps:
Step 1
In the Configuration Mode, select Auto to connect to the network automatically.
Step 2 Enter the SIM PIN – the pin code associated with your SIM card.
Step 3
Or, select Manual and to connect to the network manually and configure the following:
• Access Point Name – Enter the access point name provided by your mobile network service provider.
• Dial Number – Enter the number provided by your mobile network service provider for the Internet connection.
• Username and Password – Enter the username and password provided by your mobile network service provider.
• SIM PIN – Enter the PIN code associated with your SIM card. This field is only displayed for GSM SIM cards.
You can use a SIM PIN to prevent access to cellular data networks. In order to use cellar data, you must enter the
PIN whenever you swap SIM cards or restart your mobile.
• Service Name – Enter the name of the service.
• Authentication – Select the option to authenticate.
Step 4 Select one for the following for the Connect Mode.
• Connection on Demand – It specifies the connection timers after which the connection is terminated if there is
inactivity. Enter the Max Idle Time, in seconds, to wait before terminating the connection due to inactivity. Default
is 5 minutes.
• Keep Alive – It checks the connection with router periodically, to re-establish the connection when disconnected.
In the Redial Period, enter the time in seconds for the router to check the connection automatically. Default period
is 30 seconds.
Step 5 Click Apply.

Bandwidth Cap Setting

The Bandwidth Cap Tracking limits the transfer of specified amount of data over a period. It is also known
as a band cap or data cap. To configure the Bandwidth Cap Setting, follow these steps:
Step 1
Check Enable to enable the Bandwidth Cap Tracking and enter the following:
• Monthly Renewal Date – Select number of days to apply the bandwidth cap settings.
• Monthly Bandwidth Cap – Enter the size of the data.
Mobile Network Setup
RV260x Administration Guide
51