Epson WF-C579R Series User Manual page 198

User's Guide
B
Tap Send Fax Later to set this to On.
C
Tap the Time box, enter the time you want to send the fax, and then select OK.
D
Select OK to apply the settings.
You can also make settings such as the resolution and the sending method as necessary.
5. Send the fax.
Note:
To cancel the fax, cancel it from
Related Information
"Placing Originals" on page 39
&
"Sending Faxes Automatically Using the Control Panel" on page 191
&
"Fax Settings" on page 206
&
"Checking the Status or Logs for Fax Jobs" on page 214
&
Sending Different Size Documents Using ADF (Continuous Scan(ADF))
Sending faxes by placing originals one by one, or by placing originals by size, you can send them as one document
at their original sizes.
If you place different sized originals in the ADF, all of the originals are sent at the largest size among them. To send
originals at their original sizes, do not place originals with mixed sizes.
1. Place the first batch of originals at the same size.
2. Select Fax on the home screen.
3. Specify the recipient.
4. Select the Fax Settings tab, and then tap Continuous Scan(ADF) to set this to On.
You can also make settings such as the resolution and the sending method as necessary.
x
5. Tap (Send).
6. When scanning the first originals is complete and the message Scan complete. Scan the next page? is
displayed on the control panel, select Yes, set the next originals, and then select Start Scanning.
Note:
If you leave the printer untouched for 20 seconds after prompted to set the next originals, the printer stops storing and
starts sending the document.
Related Information
"Placing Originals" on page 39
&
"Sending Faxes Automatically Using the Control Panel" on page 191
&
"Fax Settings" on page 206
&
Faxing
.
198