Memory Clear - Furuno NX-700B Service Manual

7.4 Memory Clear

This section describes information on clearing memory.
1. [MENU] -> Service -> Default Setting
This setting restores the user setting menu to the default, except "Edit Station List" in
"[MENU] -> Service" menu. However, received messages are not deleted.
Select "[MENU] -> Service -> Default Setting". Select "Yes" and then press the [ENT] key.
Menu
NAVTEX
System
Display
Service
2. [MENU] -> Initialize 1 -> All Clear
All the settings are reset to the default and received messages are deleted.
Select [MENU] -> Initialize 1 -> All Clear. Select "Yes" and then press the [ENT] key.
When "All Clear" is executed, select "On" in the setting of "[MENU] -> Initialize2 ->
Russia Mode" for the Russian type equipment.
Menu
NAVTEX
System
Display
Service
Initialize1
Initialize2
3. [MENU] -> Initialize 1 -> Delete All Msgs
All received messages are cleared.
Select Initialize 1 -> Delete All Msgs. Select "Yes" and then press the [ENT] key.
Service
INS Input Speed 4800bps
INS Output Speed 4800bps
Printer Header On
Edit Station List
Default Setting
Test
Rcv Monitor
Initialize1
Delete All Msgs
All Clear
Dem Mode Off
System Test Results
View Nav Data
ZCZC Chaeck
On
00>B1>B2
00 Msg Priority
Old -> New
Print Order
Available Rcv Station List
Adjust Rx Unit
Rx Test
7-15
7.4 Memory Clear
Restore default settings ?
(Print will be canceled.)
Yes No
Clear all settings ?
(Print will be canceled.)
Yes No