Furuno NX-700B Service Manual page 101

Output Test Results
11. If any key other than the power key is pressed, the results of the Factory Test are
outputted to the printer.
Output Test Results
Connect PC.
Hit any key to send.
Related information:
The factory test results are displayed by selecting "System Test Results" in the
Initialize1 menu.
Fig. 7.1.3 Example: Printing of Output Test Result
Turn off power
12. Turn off the power if the screen shows the message "Turn off power".
7-9
7.1 Self Test
Prints the result of
judgment of Pass or Fail by
factory inspector.
Prints the result of the
Loopback test.
Automatically prints the
test result.
Printing test of printer