Furuno NX-700B Service Manual page 111

Printer & battery error popup
Printer error
Battery error
Popup list for each menu
Restore default settings ?
Start test ?
Delete all message ?
Clear all settings ?
View nav data ?
Display system test results ?
Adjust Rx unit ?
Start Rx test ?
Start serviceman test ?
Fill Rx memory with test message ?
Note:
When "NX-700A, Upright, or Inverted" is selected in the setting of "[MENU] -> System
-> Printer", a message "Print will be canceled" is added.
Popup Message in Edit Station List menu
Delete Station ?
Save new station ?
Save new station ?
Edit ID data.
Exit without saving ?
Save station ?
Table 7.5.2 Printer and Battery error popup list
Printer error
Displayed when paper runs out or the printer door is open.
Related setting; Printer setting
[MENU] -> System -> Printer
Displayed when the voltage of the backup battery of the CPU
board goes down below +2.5 VDC. The Status field of the
received message shows
To check the battery voltage, execute "[MENU] -> Service ->
Test".
Table 7.5.3 Popup list for each menu
Applicable menu
[MENU] -> Service -> Default Setting
[MENU] -> Service -> Test
[MENU] -> Initialize1 -> Delete All Msgs
[MENU] -> Initialize1 -> All Clear
[MENU] -> Initialize1 -> View Nav Data
[MENU] -> Initialize1 -> System Test Results
[MENU] -> Initialize1 -> Adjust Rx Unit
[MENU] -> Initialize1 -> Rx Test
[MENU] -> Initialize2 -> Serviceman Test
[MENU] -> Initialize2 -> Fill Memory
Table 7.5.4 Edit station list menu popup list
[MENU] -> Service -> Edit Station List
[MENU] -> Service -> Edit Station List
[MENU] -> Service -> Edit Station List
[MENU] -> Service -> Edit Station List
[MENU] -> Service -> Edit Station List
[MENU] -> Service -> Edit Station List
7-19
7.5 Popup Message
Description
mark.
Applicable menu