Checking Connection Status - Sony PCS-5100 Operating Instructions Manual

Checking Connection Status

During a meeting, you can check the settings of your connections.
1
Select [OTHER] from the MAIN menu.
The OTHER sub-menu appears.
INPUT MULTI
QUICK GRAPH
MENU MENU
2
Select [STATUS].
The STATUS list appears.
CODEC:
LINE I/F:
NUMBER OF LINE:
LINE RATE:
AUDIO MODE (Enc):
AUDIO MODE (Dec):
VIDEO MODE:
FRAME RATE:
FAR END CONTROL:
The STATUS list allows you to check the following items:
Item
CODEC
LINE I/F
NUMBER OF LINE
LINE RATE
AUDIO MODE (Enc)
AUDIO MODE (Dec)
VIDEO MODE
FRAME RATE
FAR END CONTROL
a) PCS-5100/5100P are contained in the PCS-5000 series system.
b) When using the I-MUX interface, "1" is displayed.
To revert to the MAIN menu
Press [EXIT] .
SETUP
STATUS
DTMF
USER DATA
DIAL LIST
MANUAL DIAL
P in P CAMERA POINT AUDIO OTHER
[OTHER]
PCS-5000
BRI
6
384K
G.728
G.728
H.261 CIF
30
SONY
Meaning
ITU-T: Remote party is using equipment
conforming to standards.
PCS-2000: The remote party is using a PCS-2000
series system.
PCS-5000: The remote party is using a PCS-5000/
4000/3000 series
The line interface presently in use.
The number of lines presently in use
The present transmission rate.
The present audio encoding system at the local
party.
The present audio encoding system at the remote
party.
The present video encoding mode.
The present maximum frame rate of sending a
motion picture.
OFF: No control.
H.281: The remote camera control form based on
H.281 standards.
SONY: The remote camera control form based on
Sony standards.
Chapter 1 Using the Basic System
END OF
MEETING
EXIT
a)
.
b) .
1-19