Alerts & Warnings; Reacting To Alerts; Pressure Andt; First Alert Level - BENDIX SmarTire Operator's Manual

A & W
LERTS
R
EACTING TO
P
RESSURE AND
F A L
IRST LERT EVEL
Indicated By: Flashing LED Light, Alert Triangle, + or - Deviation Value.
under- or over-inflated. The pressure deviation value indicates the amount of
under (-), or over (+) inflation that should be corrected.
To acknowledge this alert and return to the TPMS ready screen, press any
button. The LED will stop flashing but remain illuminated until the problem is
corrected. To correct the problem, add or remove air to the affected tire as
indicated by the deviation value. When the deviation value is 0 the tire is
properly inflated.
BW8002
ARNINGS
A & W
LERTS ARNINGS
IMPORTANT: It is important to always react to the
alerts and warnings provided by the SmarTire TPMS
(Tire Pressure
recommended that tire conditions always be
corrected as soon as possible and before the
vehicle is driven. Once the pressure is restored or
the temperature
automatically turn off.
T
EMPERATURE
(FAL): P
RESSURE
This alert is intended to give you an early
indication that the tire is low/high. This alert is
typically
compensated
compensation is selected for the alert). If so,
you may see that the pressure is above the
CIP, but due to the temperature of the tire, the
pressure is actually low or high depending on
the deviation value showed.
The axle designator and the highlighted wheel
position indicate the position of the tire that is
Monitoring
is reduced,
A
LERTS
D A
EVIATION LERT
based
value
System).
the alert
on the temperature
(if temperature
It is
will
Page 19