Roubleshooting Low Hart - BENDIX SmarTire Operator's Manual

S F
ENSOR AULT
Is the gauge
displaying a Sensor
Fault?
Has the vehicle been
idling for more than 35
minutes with the ignition
power "ON"?
Does the fault clear
away after driving
YES
If this happens frequently, this may
indicate a system issue, Report to
Maintenance.
BW8002
T
ROUBLESHOOTING
Driver Sensor Fault Troubleshooting
Wait 3-5 minutes after key on for data
YES
to be received. Issue resolved?
Move the vehicle to reposition the
sensor and wait 3-5 min for next
transmission. Issue resolved?
Is the Sensor Fault
intermittent or constant? For
example, does the fault go
away after driving or always
INTERMITTENT
NO
YES
NO
again?
Report to Maintenance.
F C
LOW
NO
NO
stay on?
CONSTANT
NO
This is an indication of missing
sensor, mis-programmed sensor ID
code, or reception issue. Report to
Maintenance.
HART
Sensor Fault Cleared
YES
YES
Have the tires been
serviced prior to the
YES
sensor fault becoming
active?
This is an indication that either a
sensor was not replaced during
servicing or the new ID code was
not programmed. Report to
Maintenance.
Page 25