U‐Hub
This shows a list of all connected devices found grouped into categories; U‐Hub Controllers, MLA, MLD, MLX et cetera. Each
individual U‐Net network created either by a U‐Hub, Merlin or USB connected device (such as an MSX or DD12) will create an
individual window with the IP address shown at the top. All devices connected to that U‐Net loop will be listed grouped by type.
Next press the 'Run Wizard' button and an individual Wizard will run for all categories, the first will be MLA, MLD or MLA
Compact; ‐
If you have more than one array of each type of cabinet on the same U‐Net loop you have the opportunity to divide them into
two or more arrays as required. Use the up/down button to select the number of arrays then change the number of cabinets in
each array to match what you physically have connected; ‐
U‐Hub User Guide V1.0
USER GUIDE
38