Accessories; Cables - Martin Audio U-Hub User Manual

U‐Hub
Accessories
Cables
A full range of U‐Net cables in various lengths are available for connections within an MLA series system; ‐
All cables use Belden 1305A tour grade CAT5E cable and feature the 8‐pin ODU connector which is fitted with a unique over‐
moulded strain relief making them incredibly robust. The part numbers are as follows; ‐
800mm PWA00038
3m PWA00039
5m PWA00051
in close proximity to the subs
15m PWA00063
35m PWA00040
cross‐stage Ethernet links
50m PWA00077
75m PWA00052
Ethernet links on large festival stages.
125m PWA00041
so can be used for the ultimate array loom in situations where the cable pick has to be virtually invisible and therefore is likely
to be particularly long.
U‐Hub User Guide V1.0
USER GUIDE
Used to link between MLA or MLA Cabinets in an array
User to link MLX, DSX or MSX Subwoofers
General purpose cable, often used to link from a U‐Hub to the first subwoofer where the racks are
General purpose cable, often used to link from a U‐Hub to the first subwoofer in an array.
Most commonly used as part of an array loom to go from a rack up to a flown array and back and as
Extra‐long Array looms.
Supplied on a cable drum, used for Ethernet connection to Front of house or extra‐long cross stage
Supplied on a cable drum. 125m is the maximum cable length between nodes on a U‐Net network
18