Program Version; Alarm Log; Menu Screens And Password Levels; Lc6000/Tec-Eye Passwords (Defaults) - Bard MEGA-TEC W120AP Service Instructions Manual

Program Version

The Program Version screen displays the model number
of the unit as well as all program version information
for the PLC (see Figure 6). This information can be
used to determine whether a software update may be
required based on information found in the software
change log. This change log can be found at http://
www.bardhvac.com/software-download/.
FIGURE 6

Program Version

NOTICE
It is important to check the software version
during installation to ensure that the latest
version has been installed. Current software
versions, change log and installation
instructions are available on the Bard website at
http://www.bardhvac.com/software-download/

Alarm Log

The alarm log screens show a log of each alarm. There
will be a log for when alarm occurred and if the alarm
auto clears, it will show when the alarm cleared. See
page 11 for information on clearing alarms.

Menu Screens and Password Levels

A
System Config: A1-A5 User (2000)
B Adv Sys Config: B1-B4 Technician (1313)
C I-O Config: Technician (1313)
D On/Off: User (2000)
E Alarm Logs: User (1313)
F
Settings
Date/Time: Technician (1313)
Language: User (2000)
Serial Ports: Technician (1313)
Password Change
Initialization
Alarm Initialization: User (2000)
Default Installation: Engineer (9254)
Parameters Import/Export: Engineer (9254)
Alarm Export: User (2000)
Unit of Measure:
G
Logout: Used to log out of the current password level.
Entering back into the menu requires password.
TABLE 2

LC6000/TEC-EYE Passwords (Defaults)

User
Technician
Engineer
Use UP or DOWN keys and ENTER key to enter password
The passwords listed above are the default passwords.
End users can change these passwords if additional
security is desired.
2000
1313
9254
Manual 2100-671
Page 9 of 44