Figure 48 Serial/Model Number Configuration - Bard MEGA-TEC W120AP Service Instructions Manual

4. Press UP or DOWN keys to scroll to Unit Setup B1
(see Figure 48).
5. Press ENTER key to advance the cursor to the digit
that needs changed in the serial/model number.
6. Press UP or DOWN keys to change value of the digit.
7. Continue Steps 5 and 6 until the serial/model
number(s) are correct and reflect the number on
the product label.
For more information on the options and settings
available for specific model numbers, see the model
number breakdown in Figure 49.
FIGURE 48
Serial/Model Number Configuration
Manual 2100-671
Page 32 of 44