Safety And Instructional Decals - Exmark Lazer Z Operator's Manual

Safety

Safety and Instructional Decals

• Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
• Replace all worn, damaged, or missing safety
signs.
• When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
• If an attachment or accessory has been installed,
make sure current safety signs are visible.
99-8936
1. Machine speed
2. Fast
3. Slow
106-2655
1. Warning-do not touch or approach moving belts;
remove the ignition key and read the instructions before
servicing or performing maintenance.
decal99-8936
4. Neutral
5. Reverse
decal106-2655
• New safety signs may be obtained from
your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
• Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
• Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Exmark commercial mower.
1. Warning—do not touch the hot surface.
12
106-5517
decal106-5517