Safety And Instructional Decals - Exmark STARIS S Series Operator's Manual

Safety

Safety and Instructional Decals

• Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
• Replace all worn, damaged, or missing safety
signs.
• When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
• If an attachment or accessory has been installed,
make sure current safety signs are visible.
98-1977
1. Entanglement hazard, belt—stay away from moving
parts.
106-5517
1. Warning—do not touch the hot surface.
112-9028
1. Warning—stay away from moving parts; keep all guards
and shields in place.
• New safety signs may be obtained from
your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
• Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
• Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Exmark commercial mower.
decal98-1977
1. Parking brake—engaged 2. Parking
decal106-5517
decal112-9028
1. Interval
2. Power Take-off (PTO)
3. Parking brake
6
116-5988
brake—disengaged
116-7912
4. Neutral
5. Operator presence
control
6. Battery
decal116-5988
decal116-7912