Denon PMA-1600NE Owner's Manual page 39

Contents Connections
G Select the "PMA-1600NE" format.
It is normally recommended to set the format to "384000.0 Hz" and
0
"2ch-32 bit Interger".
PMA-1600NE
PMA-1600NE
u
.
H Quit Audio MIDI Setup.
Front panel Rear panel
Playback Settings
o Playback
Install the desired player software on your computer beforehand.
Use the rear panel USB-DAC port to connect this unit to a computer.
1
39
Remote control
unit
Tips
Press the input source select button (USB-DAC) to
switch the input source to "USB-DAC".
"USB-DAC" is displayed on the display of this unit.
Start playback on the computer's player software.
The digital audio signal that is being input is shown as follows in the
display.
"USB: PCM
xxxxkHz"
(xxxx is the sampling frequency.)
If the sampling frequency cannot be detected, "Unlocked" will be
0
displayed.
"Unsupported" is displayed when audio signals that are not
0
supported by this unit are input.
Index
Appendix
"USB: DSD
or
xxxMHz"