Denon PMA-1600NE Owner's Manual page 37

Contents Connections
B Click the "Advanced" tab.
C Select the sampling rate and bit rate to be applied to the D/A
converter.
It is recommended that "2 channel, 24 bit, 192000 Hz (Studio
0
Quality)" is selected (Windows 7).
It is recommended that "2 channel, 32 bit, 192000 Hz (Studio
0
Quality)" is selected (Windows 8/Windows 8.1/Windows 10).
D Click "Apply".
E Click "Test".
Check that audio from this unit is output from the PC.
0
.
Front panel Rear panel
Playback Settings
NOTE
0 The dedicated driver must be installed in the PC before this unit is connected to a
PC. Operation will not occur correctly if connected to the PC before the dedicated
driver has been installed.
0 Operation may fail in some PC hardware and software configurations.
0 Player software supporting the Audio Stream Input Output (ASIO) driver is
required to play files with a sampling frequency of 352.8 kHz/384 kHz without
downsampling. Check your player software before playing files with the ASIO
driver.
0 Please see the FAQ at www.denon.com if you experience any issues getting audio
to play from your computer through the this unit. You may also want to check the
support pages for your audio player application.
w
t
e
r
37
Remote control
unit
Tips
Index
Appendix