Denon PMA-1600NE Owner's Manual page 38

Contents Connections
o Audio Device Settings (Mac OS X only)
A With the unit power off, connect the unit and Mac using a USB cable
(sold separately).
For the connection procedure, refer to the "Connecting a PC or Mac"
0
section. (v p. 24)
B Press X.
C Press the input source select button (USB-DAC) to switch the input
source to "USB-DAC".
D Move the cursor to "Go" on the computer screen, and then click
"Utilities".
The utility list is displayed.
0
E Double-click "Audio MIDI Setup".
The "Audio Devices" window is displayed.
0
F Check that "Use this device for sound output" is checked in
"PMA-1600NE".
If a different device is checked, select and "Secondary click" on
0
"PMA-1600NE", and then select "Use this device for sound output".
Front panel Rear panel
Playback Settings
.
38
Remote control
unit
Tips
PMA-1600NE
PMA-1600NE
y
Index
Appendix