Lexmark MS312 Service Manual page 97

Error code Description
241.17 Page was not properly picked from tray 1. Have
not exhausted all pick retry attempts as there are
sheets committed to the paper path from below.
241.20 Took too long to ramp up media feeder motor in
tray 1.
241.21 Media feeder motor stall in tray 1.
241.22 Media feeder motor pick motor underspeed in
tray 1.
241.24 Media feeder motor stalled on the last pick
attempt in tray 1.
241.32 Media tray not ready.
241.33 The media tray was pulled during the media pick
process.
241.41 Media feeder motor stall in tray 1.
241.42 Media feeder motor pick motor under‑speed in
tray 1.
241.43 Media feeder motor stalled on the last pick
attempt in tray 1.
241.44 Motor 2 (Separator/Passthrough) motor stalled.
241.45 Motor 2 (Separator/Passthrough) motor PWM
overflow error (underspeed). Motor underspeed
(max PWM and motor underspeed, typical
accordion jam).
241.46 Motor 2 (Separator/Passthrough) motor ramp
(end ramp - did not reach speed, typical pack
feed paper jam).
241.47 Motor 3 motor stalled.
241.48 Motor 3 motor PWM overflow error (underspeed).
Motor underspeed (max PWM and motor
underspeed, typical accordion jam).
241.49 Motor 3 motor ramp (end ramp - did not reach
speed, typical pack feed paper jam).
Action
Go to
Go to
Go to
Go to
Go to
Go to
Go to
Go to
Go to
Go to
Go to
Go to
Go to
Go to
Go to
Go to
Diagnostics and troubleshooting
97
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
"Tray 1 jam service check" on page
4514-330
98.
98.
98.
98.
98.
98.
98.
98.
98.
98.
98.
98.
98.
98.
98.
98.