Scenario 3: External Users To Internal Server; Figure 41: Network Deployment Diagram - External Users To Internal Server; Figure 42: Configure External Network Adapter And Nat - Grandstream Networks IPVT10 Administration Manual

Scenario 3: External Users to Internal Server

The server is deployed on the internal network for external users. The users need to use the service via the
public network. In this case, users need to configure the external network IP address and static NAT in the
server. If the server is deployed on the internal network, and all participants need to use the service via
public network, users need to configure the static NAT to ensure the certain public networks are able to
access the server. Users could configure the External Network Adapter and NAT to complete the
configuration. This deployment does not support users to access the server directly via the internal network.
Otherwise, it may cause the abnormal issues for the conferences.
Figure 41: Network Deployment Diagram – External Users to Internal Server

Figure 42: Configure External Network Adapter and NAT

IPVT10 Administration Guide P a g e | 64
Version 1.0.2.8