Installing The Dlc Protocol - Siemens SCALANCE X-100 Commissioning Manual

Figure 6-1
6.1.4

Installing the DLC Protocol

Procedure
Follow the steps below to install the DLC protocol on a computer:
1. Select the menu Start > Settings > Control Panel > Network and Dial-up Connections.
2. Select the connection to your Ethernet communications module.
3. Open the Properties dialog using the context-sensitive menu (right mouse button).
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
Commissioning Manual, 1,
Properties of Local Area Connection-1
Diagnostics over Industrial Ethernet
6.1 Configuration with the Primary Setup Tool
6-3