Installation; Location; Shipping Damage - Hussmann Elite Series Installation & Operation Manual

Service merchandisers. fresh meat, delicatessen, and seafood merchandisers (includes wedge installation). nsf certified.
Table of Contents

Advertisement

P/N 0453549_M
NSF LISTING
These merchandisers are manufactured to
meet ANSI / UL 471 standard requirements
for safety . Proper installation is required to
maintain this listing . Near the serial plate,
each case carries a label identifying the type of
conditions for which the merchandiser was
tested .
ANSI/NSF-7 Type I – Display
Refrigerator / Freezer Intended for 75°F /
55%RH Ambient Application
ANSI/NSF-7 Type II – Display
Refrigerator / Freezer Intended for 80°F /
55%RH Ambient Application
ANSI/NSF-7 – Display Refrigerator
Intended for Bulk Produce
FEDERAL / STATE REGULATION
These merchandisers, at the time they are
manufactured, meet all federal and state /
provincial regulations .

LOCATION

These merchandisers are designed for dis-
playing products in air conditioned stores
where temperature is maintained at or below
the ANSI/NSF-7 specified level and relative
humidity is maintained at or below 55% .
Placing refrigerated merchandisers in direct
sunlight, near hot tables or near other heat
sources could impair their efficiency .
Like other merchandisers, these are sensi-
tive to air disturbances . Air currents passing
around merchandisers will seriously impair
their operation . Do NOT allow air condition-
ing, electric fans, open doors or windows, etc .
to create air currents around the merchandisers .
Product should always be maintained at proper
temperature . This means that from the
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.

INSTALLATION

time the product is received, through storage,
preparation and display, the temperature of
the product must be controlled to maximize
the life of the product .

SHIPPING DAMAGE

All equipment should be thoroughly exam-
ined for shipping damage before and during
unloading . This equipment has been carefully
inspected at our factory . Any claim for loss
or damage must be made to the carrier . The
carrier will provide any necessary inspection
reports and/or claim forms .
Apparent Loss Or Damage
If there is an obvious loss or damage, it must
be noted on the freight bill or express receipt
and signed by the carrier's agent; otherwise,
carrier may refuse claim .
Concealed Loss Or Damage
When loss or damage is not apparent until
after equipment is uncrated, retain all packing
materials and submit a written request to the
carrier for inspection, within 15 days .
Elite Service Merchandisers
1-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

EsbdEsgsEsbdsEsgssEsgmEs1 ... Show all

Table of Contents