Oki C542 Advanced Manual page 213

Item
Maintenance Reset/Restore
Network Scale
• Print From USB Memory Setup
Set Print From USB Memory.
Item
Default Settings
• Print Setup
Item
Print Menu Print Setup
Printer Adjust
Print Position Adjust
Drum Cleaning
Hex Dump
Color Menu
System Configuration Menu
Emulation PCL Setup
PS Setup
XPS Setup
IBM PPR Setup
EPSON FX Setup
Private Print Setup
• Management
You can set device settings.
Description
Restarts and resets a network. Even if you access the
Web page from the Web browser after restarting, the
Web page is not displayed until the restart is complete.
Resetting restores the IP address to its default status,
resulting in information you manually set being lost. In
such a case, the Web page cannot be displayed.
Improves operation efficiency on a network. This setting
is very effective when a hub that has the spanning tree
function is used, or a computer and the machine are
connected one-on-one with a cross cable.
Description
Sets default settings when printing from USB Memory.
Description
Sets the number of copies, resolution, and other settings.
When using the printer driver, the values that are set with
the printer driver are given priority over these settings.
Sets manual timeout, jam recovery, and other print
adjustment settings.
Adjusts front X, front Y, back X and back Y positions.
Sets cleaning of an image drum.
Displays all the received print data in hex. To exit this
mode, restart the machine.
Sets Color settings.
Sets operation modes, alarm release, and other machine
operation settings for each situation.
Sets PCL.
Sets PS.
Sets XPS.
Sets IBM PPR Setup.
Sets EPSON FX Setup.
Sets whether device will handle as a private print.
Item
Local Interface USB Menu
Access Control Setup
System Setup
Power Save
Memory Setup
Language Maintenance Setup
Font Setup
STOP Key Behavior
Admin Password
Reset Settings
Print Statistics
• User Install
Item
Power Setup
Time Setup
Business Phone Setup
Other Settings
If [Auto] is selected for Time Setup, the time cannot be set from the operator panel.
• Job List
This function is displayed only if you log in as the administrator of the machine.
- 213 -
7. Utility Software
Description
Sets USB.
Sets user authentication and access control.
Sets display units and other settings.
Sets power save settings.
Sets the reception buffer size and resource save area.
Sets Language settings.
Sets the output mode for fonts.
Sets the behavior when the STOP key is pressed.
Setting to ON cancels the print job. Setting to OFF
disables the function.
Sets an administrator password.
Initializes all the data that is set in "Management".
Enables/disables consumable counter.
Description
Sets Auto power off and Power supply Return.
Sets the time to the machine.
Sets up business phones.
Sets other settings.