Oki C542 Advanced Manual page 133

• Memory Setup
Item Factory
default
setting
Receive Buffer Size Auto
Resource Save OFF
• Flash Memory Setup* 1
Item Factory
default
setting
Initialize Execute
Format Partition PCL (NULL)
Common (NULL)
PS (NULL)
• Storage Maintenance Setup
Item Factory
default
setting
Check File System Execute
Initial Lock Enable
• Language Maint Setup
Item Factory
default
setting
Select Language English
Initialize* 1 Execute
• Keyboard Layout
Item Factory
default
setting
Keyboard Layout QWERTY
Description
Sets the reception buffer size that local interface secures.
Sets the resource save area.
Description
Initializes a flash memory.
This item is displayed when [Initial Lock] is set to [Disable].
Formats a partition.
Description
Resolves any mismatch between actual memory and
displayed memory available in a file system and performs
administration data (FAT information) recovery.
Sets whether to give permission to change settings associated
with the memory initialization.
Description
Selects display language for the LCD panel.
Deletes downloaded message files.
Description
Select which to use QWERTY keyboard or AZERTY keyboard
for your keyboard on the touch panel.
• STOP Key Behavior
Item
STOP Key Behavior OFF
• Admin Password
Item
New Password 999999
Enter password (Verify)
• Reset Settings* 2
Item
2
Reset Settings* -
• Job Log Setup
Item
3
Clear Job Log* -
• Print Statistics
Item
Maintenance Counter Disable
Reset Main Counter -
Reset Supplies Counter -
*1 A message is displayed to confirm the equipment restarts automatically when changes have been made. Select
[Yes] to continue. Select [No] to cancel.
*2 A message is displayed to confirm the equipment restarts automatically when executed. Select [Yes] to continue.
Select [No] to cancel.
*3 A message is displayed to confirm that all job logs are deleted when executed. Select [Yes] to continue. Select
[No] to cancel.
- 133 -
5. Operating Management/ Specifications
Factory Description
default
setting
Sets the behavior when the STOP key is pressed. Setting to
ON cancels the print job. Setting to OFF disables the function.
Factory Description
default
setting
Changes the administrator password. 6 to 12 characters can
be used.
Factory Description
default
setting
Deletes job macros and returns the settings to the default.
Factory Description
default
setting
Clears the saved job logs.
Factory Description
default
setting
Sets whether to print the consumable counter's report.
Resets the main counter.
Reset the consumable counter.
This item is displayed when [Maintenance Counter] is set to
[Enable].