Oki C542 Advanced Manual page 126

• Drum Cleaning
Item Factory
default
setting
Drum Cleaning OFF
• Hex Dump
Item Factory
default
setting
Hex Dump OFF
Color Menu
Item Factory
default
setting
Density Control Auto
Adjust Density -
Color Tuning / Print Pattern -
Cyan Tuning Cyan Highlight 0
Cyan Mid-Tone 0
Cyan Dark 0
Magenta Tuning Magenta 0
Highlight
Magenta Mid- 0
Tone
Magenta Dark 0
Yellow Tuning Yellow Highlight 0
Yellow Mid-Tone 0
Yellow Dark 0
Black Tuning Black Highlight 0
Black Mid-Tone 0
Black Dark 0
Description
Sets whether to clean the drum before printing. The image
quality improvement may be expected.
Description
Prints out the data received from the host computer in hex. To
finish printing, turn off the machine.
Description
Select "Auto" or "Manual" for adjusting density.
Adjusting density is performed right after this menu is selected.
A test page is printed for checking the adjusting value to be
entered for any other C/M/Y/K Tuning menus.
Adjust the value for Highlight / Mid-tone / Dark of each color
within a range of -3 to +3.
+ : Adjusted to be darker.
- : Adjusted to be lighter.
Item Factory
default
setting
Color Density Cyan Density 0
Magenta 0
Density
Yellow Density 0
Black Density 0
Adjust Registration
Ink Simulation OFF
UCR Low
CMY100% Density Disable
CMYK Conversion ON
System Configuration Menu
Item Factory
default
setting
Personality Auto
Alarm Release Manual
Auto Continue OFF
Error Report OFF
PCL Setup
Item Factory
default
setting
Font Source Resident
- 126 -
5. Operating Management/ Specifications
Description
Adjust the total density of each color within a range of -3 to +3.
+ : Adjusted to be darker.
- : Adjusted to be lighter.
Color registration adjustment is performed.
Sets the ink simulation. This setting is enabled only for PS
language jobs.
Adjusts the level of under color removal.
Selects whether to use halftone for C, M, Y 100% density.
Selects whether to use simple (quick) mode when performing
CMYK Conversion.
This menu setting is disabled if using the ink simulation function.
Description
Selects the emulation mode. If auto is set, the correct emulation
is automatically selected every time a print job is received.
If [Manual] is set, non-critical warnings, such as requests for a
different paper size, can be cleared by pressing [RESET]. If
[Auto] is set, the warnings are cleared when the print job
resumes.
Sets whether the machine automatically recovers from a
memory overflow.
Sets whether to print error details if PostScript, PCL6 or XPS
errors occur.
Description
Selects the location of the font to use.