Accept Call; End Call; Reject Call - Siemens SL42 Owner's Manual

Siemens mobile phone owner's manual
Hide thumbs Also See for SL42:
Table of Contents

Advertisement

Accept call

The phone must be switched on to
receive calls (in standby mode).
02079898767
Answer
or, if call divert is set:
Answer
accept a call with:
or
Answer
A
Divert
divert the call.

End call

Press.
S

Reject call

or
Reject
S
The caller hears the busy signal.
Divert
Diverts, say, to the mailbox, if
this diversion has been set,
see p. 60.
Making a phone call
~
K
Reject
Divert
or with
Accepting with stereo
headphones
If a call comes in, the music is automatically
interrupted. Press the PTT key to accept the
call or to end the call (see p. 27).
Accepting with Answer.message
You must have recorded and activated an
Answer.message.
When a call comes in, press the dictation
key briefly . The call is accepted and an
Answer.message is played without you
having to speak (see also p. 31).
The numbers of calls that have been
received and missed are stored for call
backpurposes, see p. 53.
You can also press any key to accept a call,
for the setting, see "Any key answer", p. 62.
An incoming call will interrupt any other use
of the phone.
For data calls and fax calls see p. 75.
For functions during the call see p. 16.
Switch off the ringer for the current call:
Hold down.
*
The call is displayed. The caller
hears the dialling tone.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl45i

Table of Contents