Making A Phone Call; Dialing With Number Keys; End Call; Accept Call - Siemens S46 User Manual

6.11.01 S46 US DRAFT
20

Dialing with number keys

The phone must be switched on
(standby mode).
Enter the phone number
(always with prefix, if
necessary with the inter-
national dialing code).
A short press clears
the last digit, a long press
clears the entire number.
Store phone number
in the Addressbook
(p. 26).
Press the Call key.The
phone number displayed
is dialed.
International dialing codes
Many international dialing codes are stored
in your phone:
Hold down until a "+" symbol
appears. This replaces the
first two digits of the interna-
tional dialing code.
g/LVWg
Press.
Select the required country. The internation-
al dialing code is displayed. Now add the
national number (in many countries without
the first digit if it is a zero) and press the Call
key.
A31008-H5450-A5-*

Making a phone call

End call

Press the End key briefly.
The call is ended.
Press this key even if the person on the
other end of the line has hung up first.

Accept call

+498912345
Reply
The phone must be switched on
(standby mode).
g5HSO\g
Press or
press again.
You can answer incoming calls using any
key (p. 77).

Reject call

g5HMHFWg
Press or
press briefly.
g'LYHUWg
Diverts the caller e.g. to the
mailbox if this is set (p. 53).
Reject