Making Calls; Making An External Call/Ending A Call; Answering A Call; Calling Line Identification - Siemens Gigaset E365 Manual

Making calls

Making calls
Making an external call/ending a
call
External calls are calls using the public tel-
ephone network.
~ (Enter phone number)
The number is dialled. (You can also first
press the c key [ringtone] and then enter
the number.) The earpiece volume can be
adjusted during the call with the t key.
End a call/cancel dialling:
Press the end call key aor place the hand-
set in the base station or charging cradle.

Answering a call

The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing handsfree
key d.
You can answer the call by:
¤
Pressing the talk key c.
¤
Pressing the handsfree key d.
¤
Press the display key
If the handset is in the base and the
function is activated (page 32), the
Answer
handset will answer a call automatically
when you lift it out of the base.
If the ringtone is intrusive, press
The ringtone is switched off for this call.
You can answer the call so long as it is dis-
played on the screen.

Calling line identification

When you receive a call, the caller's
number and/or name is displayed on the
screen if the following conditions are met:
u
Your network provider supports CLIP,
CLI and CNIP:
– CLI (calling line identification): the
caller's number is transmitted
14
¢
c.
.
§Accept§
Auto
.
§Silence§
– CLIP (calling line identification pres-
entation): the caller's number is dis-
played
– CNIP (calling name identification
presentation): the caller's name is
displayed
u
You have arranged CLIP or CNIP with
your network provider.
u
The caller has arranged CLI with the
network provider.
Displaying the caller's number
The phone number of the caller is shown
on the display or also the name of the
caller if the name has been stored in the
directory or CNIP has been arranged.
Requirements:
1. You have arranged with your network
provider to have the phone number of
the caller (CLIP) or the caller's name
(CNIP) shown on your display.
2. The caller has arranged with the net-
work provider to allow his/her phone
number to be identified (CLI).
The screen displays Extern. Call if you
have not arranged for calling line identifi-
cation presentation,
identification has been withheld by the
caller or Unavailable
arranged with the network provider.

Handsfree operation

You can make calls immediately in hands-
free mode (the d key lights up perma-
nently) after entering the phone number
by pressing the handsfree key d. Tog-
gle between earpiece and handsfree
mode during a call and when playing back
the answering machine by pressing
the d key. The volume can be
adjusted during handsfree operation
with the t key.
if calling line
Withheld
if it has not been