Change Log; Firmware Version 1.0.9.4; Firmware Version 1.0.8.2; Firmware Version 1.0.7.3 - Grandstream Networks HT701 User Manual

CHANGE LOG

This section documents significant changes from previous versions of user guide for HT70X. Only major
new features or major document updates are listed here. Minor updates for corrections or editing are not
documented here.

Firmware Version 1.0.9.4

•
No major changes.

Firmware Version 1.0.8.2

•
Upgrade the option Allow DHCP Option 66 to override server to [Allow DHCP Option 66 or 160 ]
•
Added the options to enable/disable [3CX Auto Provision]
•
Added the options to enable/disable [Disable Attended Transfer]
•
Added the options to configure [SIP Registration Failure Retry Wait Time upon 403 Forbidden]
•
Added the options to [Enable SIP OPTIONS Keep Alive] to use SIP OPTIONS instead of STUN as
Keep-Alive messages.
•
Added the options to enable/disable [Do Not Escape '#' as %23 in SIP URI]
•
Added the options to configure [SIP OPTIONS Keep Alive Max Lost]
•
Added the options to configure [Hold Target Before Refer] allows user to hold or not hold the phone call
before refer.
•
Added the options to enable/disable [Authenticate server certificate domain].
•
Added the options to enable/disable [Authenticate server certificate chain]
•
Added the options to configure [Trusted CA certificates]
•
Added the options to enable/disable [Flash Digit Control]
•
Added the options to enable/disable [Disable Connected Line ID]
•
Added the options to configure [Conference URI]
•
Added the options to configure [Fax Tone Detection Mode]
•
Added the options to enable/disable [Crypto Life Time]
•
Added the options to enable/disable [Enable Pulse Dialing]

Firmware Version 1.0.7.3

•
Added the options to enable/disable NEC [Disable Network Echo Suppressor]
HT70X User manual
Version 1.0.9.4
P a g e | 6